Table of Contents
Advertisement
Transmitter and Receiver Placement:
Vehicle Rear
Transmitter
For best reception the transmitter and receiver must be aligned with the
flat-pitted faces back to back. The antenna in the receiver should face the
rear of the vehicle and the antenna in the transmitter should face the front
of the vehicle. RF signal can be picked up between the receiver and the
transmitter best by using this method.
Power Harness and Pinout:
BLACK (-) WIRE
RED (+) WIRE
Antenna
Figure 1
58.5"
SHRINK WRAP
BLACK (-) WIRE
RED (+) WIRE
Vehicle Front
Receiver
BLACK (-) WIRE
RED (+) WIRE
(+12V Ignition)
Page 3 of 12
Rev. B 3/00
Advertisement
Table of Contents
