About This Manual; Manufacturer And Service - CEStronics AccessOne TSG1/SDC Assembly And Operating Manual

Door controller
Table of Contents

Advertisement

1 About this manual

This manual contains information on the assembly and commissioning of a TSG door controller within the AccessOne access
control system.
Other applicable documents
Setup
This manual should be treated as a part of the product and must be kept for the entire service life of the product. The manual
should be passed on to any subsequent user or owner of the product.
The information and data contained in this documentation are subject to change without prior notice. No part of this document
may be copied or transmitted for any purposes whatsoever without the express written consent of C.Ed. Schulte GmbH
Zylinderschlossfabrik.
© 2021 C.Ed. Schulte GmbH Zylinderschlossfabrik, Velbert, Germany
BRO2321 -2
Version: VA1
Always use the most up-to-date version of this manual. You can obtain updated versions free of charge from www.ces.eu.
Notes on trademark protection
MIFARE, MIFARE Classic and MIFARE DESFire are registered trademarks of NXP B.V. and are used under licence.

1.1 Manufacturer and service

The manufacturer of the door control is ACcesstronic GmbH. Service and support are provided by C.Ed. Schulte GmbH, Velbert. For
service assistance, please contact CES Service. CES Service can be contacted at +49(0)2051 204 222 or by e-mail: hotline@ces.eu
Manufacturer
ACcesstronic GmbH
Gartenstr. 38
D-52249 Eschweiler
www.ces.eu
BRO2316_EN_Manual_Set-Up-AccessOne
Service and Support
C.Ed. Schulte GmbH
Zylinderschlossfabrik
Friedrichstr. 243
D-42551 Velbert
Tel: +49 (0) 2051-204-0
Fax: +49 (0) 2051-204-229
www.ces.eu
info@ces.eu

Advertisement

Table of Contents
loading

Table of Contents