Mitsubishi DD-8050 Service Manual page 16

HOW TO EJECT MANUALLY (Method 2)
1. Turn the unit over.
2. Insert the shaft less than a diameter of 3 mm (e.g. screw-
driver) straightly into the opening as shown.
3. Turn the shaft along with the opening clockwise.
4. Repeat steps 2 and 3 until the tray will open.
5. Pull the tray slowly with a hand.
B
View for B
Rear
Turn the shaft along with
the opening clockwise.
Front
1-6-4
Shaft
(e.g. screwdriver)
Opening
E5932DC