Related Manuals for Mitsubishi DD-8050
Summary of Contents for Mitsubishi DD-8050
-
Page 1: Dvd Player
® As an E NERGY Partner, our company has determined that this product meets the E DVD Player Owner's Guide ® guidelines for energy efficiency. E NERGY DD-8050 ® ® ® is a U.S. registered mark. NERGY... - Page 2 WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. •...
-
Page 3: I Important Safeguards
5. Moisture Condensation A drastic change in temperature, such as, moving your DVD player from a cold area to a warm area can cause moisture condensation on the optical pick- up lens. You must allow the player to evaporate any moisture before you play any discs. - Page 4 (b) If liquid has been spilled, or objects have fallen into the DVD Player. (c) If the DVD Player has been exposed to rain or water. (d) If the DVD Player does not operate normally when you follow the operating instructions.
-
Page 5: I Notes
The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. -
Page 6: Table Of Contents
I MITSUBISHI DVD Player LIMITED WARRANTY........ -
Page 7: I Features
User can resume to playback from the part at which the play was stopped even if the power is turned off. ¡Component Video Out Jacks Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks. -
Page 8: I About The Discs
ABOUT THE DISCS PLAYABLE DISCS The following discs can be played back on this DVD player. Usable Mark (logo) discs DVD-Audio DVD-Video (NOTE 1) DVD-R DVD-RW (NOTE 3) CD-R CD-RW (NOTE 4) Super Audio Video DIGITAL VIDEO Picture CD NOTE 1: Some DVD-Video discs do not operate as described in this manual due to the intentions of the discs’... -
Page 9: I Operating Controls And Functions
OPERATING CONTROLS AND FUNCTIONS – 9 – 1L25... -
Page 10: Display
REAR VIEW AUDIO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM) OPTICAL COAXIAL 3132 29. Power Cord 30. Left AUDIO OUT Jack 31. OPTICAL DIGITAL AUDIO OUT Jack 32. COAXIAL DIGITAL AUDIO OUT Jack 33. Right AUDIO OUT Jack DISPLAY Lights up when the A-B repeat function is on. Displays a type of the disc which is inserted on the tray. -
Page 11: I Hookups
Be sure to turn off the power to all components in the system before connecting another component. ¡ Refer to the Owner’s Guides for your TV, stereo system and any other components to be connected to the DVD player. Selecting 480p Progressive Scan or 480i Interlaced Playback ¡... -
Page 12: Connecting To A Dolby Digital Decoder Or Dts Decoder
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT jacks. 5.1 channel Dolby Digital Surround sound can also be output from the 5.1 CH OUTPUT jacks. -
Page 13: Connecting To An Amplifier Equipped With Digital Input Jacks
TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator that is not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75-ohm coaxial antenna terminal on your TV. -
Page 14: I Playing A Disc
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.) Press the POWER button. -
Page 15: Using The Title Menu
USING THE TITLE MENU With a DVD containing a title menu, you can select desired titles from the menu. Press the TITLE button. ¡ The title menu will appear. Select the desired title. ¡ Press the Arrow buttons ( /s/B) to change the –... -
Page 16: Page Selection
PAGE SELECTION Some DVD Audio discs that include still images are provided with a selection of images you can choose from. Press the ANGLE/PAGE button during playback. ¡ The current page number and the total page number will appear. Press the K or L button to select desired page number. -
Page 17: Playing From A Desired Group
PLAYING FROM A DESIRED GROUP Press the SEARCH MODE button until the screen appears and then press the numeric buttons to select a group. When playback is stopped, press the numeric buttons to select a Group. The Group will be located and playback will start. -
Page 18: Marker Setup Screen
MARKER SETUP SCREEN DVD-A DVD-V SUPER AUDIO CD Use markers to memorize your favorite places on a disc. Press the SEARCH MODE button repeatedly during playback. ¡ The display screen and Markers will appear on the TV screen. Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and ensure that “- : - - : - -”... -
Page 19: A-B Repeat
Notes ¡ Repeat Title/Chapter is not available with some scenes. ¡ The REPEAT setting will be cleared when moving to other title or chapter. ¡ Repeat playback does not function during A-B repeat playback. For audio CDs, Super Audio CD or Video ¡... -
Page 20: Program (Cd / Super Audio Cd / Dvd-A)
PROGRAM (CD / Super Audio CD / DVD-A) Press the MODE button in stop mode. ¡ The program screen will appear. Select a track using press the ENTER button. ¡ If eight or more tracks have been set in a program, the user can switch the right part of the screen with H or G. -
Page 21: Playing Mp3 / Jpeg Image, Wma And Picture Cd
(JPEG)" is called a "JPEG file". ¡ A file with an extension of ".wma (WMA)" is called a "WMA file". The DVD player can run an image file conforming to the Exit specification. Exit is a file format, Exchangeable Image File format established by Japanese Electronic Industry Development Association (JEIDA). - Page 22 For discs of Picture CD: Press the MENU button in stop mode. Kodak Picture CD menu appears. ¡ If all menu items cannot be displayed in the screen scope, “G” appears at the right bottom of the screen, indicating that the user can view remaining items on the next page.
-
Page 23: Playing Mp3 Disc / Jpeg Disc / Wma / Picture Cd In Aprogrammed Way
PLAYING MP3 DISC / JPEG DISC / WMA / PICTURE CD IN A PROGRAMMED WAY JPEG Press the MODE button in STOP mode. ¡ The program screen shows up. PROGRAM MP3 - COLECTION FOLDER JPEG ALBUM01 ALBUM02 ALBUM03 ALBUM04 ALBUM05 ALBUM06 ALBUM07 ENTER... -
Page 24: I Settings
DVD-A DVD-V DVD-RW VR-mode This DVD player has a function which allows you to select the desired audio language and sound mode. For DVDs Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language. -
Page 25: Changing The Subtitle Language
CHANGING THE SUBTITLE LANGUAGE DVD-A This DVD player has a function which allows you to select the desired language for subtitles. Press the SUBTITLE button during playback, and then press the SUBTITLE button to select the desired subtitle language. ¡... -
Page 26: Changing The On-Screen Display
CHANGING THE ON-SCREEN DISPLAY DVD-A DVD-V SUPER AUDIO CD You can check the information about the disc by pressing the DISPLAY button on the remote control. Press the DISPLAY button during playback. ¡ The information screen will appear. ¡ Next information screen will appear by pressing the DISPLAY button repeatedly. -
Page 27: Setting Image Quality Adjustment
For WMAs WMA_MUSIC File name TITLE Title name ARTIST Artist name 2/5 0:01:23 TR(Track) (5) Program/Random Playback only PROGRAM File name Name of currently played track TITLE Name of title of the current played track ARTIST Name of artist of the current played track Current track number/the number of total tracks TIME... -
Page 28: Picture Control
Picture control Press the s/B buttons to switch the setting items. PICTURE CONTROL : SELECT MODE : NEXT MODE PICTURE CONTROL : SELECT MODE : NEXT MODE PICTURE CONTROL : SELECT MODE : NEXT MODE STANDARD: A standard image quality mode CINEMA: The image quality mode for movie pictures providing easy view of dark scenes. -
Page 29: I Changing The Setup Items
CHANGING THE SETUP ITEMS LANGUAGE SETTINGS Press the SETUP button in STOP mode. ¡ The setup screen will appear. QUICK CUSTOM QUICK SETUP PLAYER MENU ENGLISH TV ASPECT 4:3 LETTER BOX PROGRESSIVE INTERLACE DOLBY DIGITAL ICON LINE ENTER Press the buttons to select CUSTOM, and then press the ENTER button. -
Page 30: Language Code List
Language Country code Afar 4 7 4 7 Abkhazian 4 7 4 8 Afrikaans 4 7 5 2 Amharic 4 7 5 9 Arabic 4 7 6 4 Assamese 4 7 6 5 Aymara 4 7 7 1 Azerbaijani 4 7 7 2 Bashkir 4 8 4 7 Byelorussian... -
Page 31: Display Settings
The setting will be effective when you exit the setup screen by pressing SETUP button. ¡ When PROGRESSIVE SCAN is PROGRESSIVE, "P.SCAN" appears on the DVD player's display. ¡ Refer to page 11 for more details. BACKGROUND (Default: BLUE) Select blue or gray. -
Page 32: Audio Settings
(If you selected TV ASPECT, PICTURE CONTROL, STILL MODE, PANEL DISPLAY, PROGRESSIVE or BACKGROUND) Press the buttons to select a desired item, and then press the ENTER button. (If you selected ANGLE ICON or ON SCREEN INFO) Press the ENTER button. Press the SETUP button. - Page 33 SPEAKER (Default:2ch) This is to be set when it is connected to the 5.1 channel analog input terminal of AV amplifier. ¡Press the K K /L L buttons to select an item, and then press the ENTER button. 2 ch: Select this when it is connected to the AUDIO OUT (L/R) terminal.
-
Page 34: Parental Lock
SACD (Default:MULTI-CH AREA) MULTI-CH AREA : Playback a multi-ch area. 2CH AREA : Playback a 2ch area. CD AREA : Playback a CD area. ¡When choosing MULTI-CH AREA, choose 5.1 CH as well as the audio channel in the audio setting of the setup menu. DISPLAY LANGUAGE AUDIO... -
Page 35: I Troubleshooting Guide
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Owner’s Guide, check the player, consulting the following checklist. Symptom ¡ Loose power plug. No power ¡ The remote control is not aimed at the sensor on the player. -
Page 36: I Handling Precautions
1-800-332-2119 to locate an Authorized Service Center. Cabinet Cleaning • Wipe the front panel and other exterior surfaces of the DVD player with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray any type of liquid near the DVD player. Certain chemicals may cause damage and discoloration to the exposed surfaces. -
Page 37: Disc Handling
HANDLING PRECAUTIONS (continued) Disc Handling • Use discs which have the following logos on them. • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. •... -
Page 38: I Specifications
Power consumption : Operating temperature : Dimensions : Weight : ¡ Designs and specifications are subject to change without notice. SPECIFICATIONS DVD Player DVD audio DVD video Audio CD Super Audio CD Video CD NTSC color DVD (Linear PCM) 20 Hz to 22 kHz (sample rate: 48 kHz) - Page 39 MEMO – 39 – 1L25...
-
Page 40: I Mitsubishi Dvd Player Limited Warranty
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this DVD player if purchased from an authorized MITSUBISHI Audio/Video Dealer that, should it prove defective by reason of improper workmanship and/or material: a. Parts. For one year from the date of original purchase at retail, we will repair or replace, at our option, any defective part without charge for the part.