Table of Contents
Advertisement
Control functions
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO", and
then push the "SELECT" button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
E LO
1. Odometer/tripmeter/fuel reserve tripmeter
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "TRIP A" and "TRIP
B" in the following order:
ODO → TRIP A → TRIP B → ODO
If the fuel level warning indicator and warning
light come on (see page 16), the odometer
display will automatically change to the fuel
reserve tripmeter mode "TRIP F" and start
counting the distance traveled from that
point. In that case, push the "SELECT" but-
ton to switch the display between the various
tripmeter and odometer modes in the follow-
ing order:
TRIP F → ODO → TRIP A → TRIP B → TRIP F
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RE-
SET" button for at least 1 second. If you do
not reset the fuel reserve tripmeter manually,
it will reset itself automatically, and the dis-
14
play will return to the prior mode after the
snowmobile has been refueled and traveled 5
km (3 mi).
Oil change tripmeter
When the periodic oil change interval is
reached at the initial 800 km (500 mi), then at
every 4000 km (2500 mi) thereafter, the oil
change tripmeter and "OIL" flash alternately
in the odometer display, and the tripmeter
starts counting the distance traveled from
that point. When this occurs, change the en-
gine oil as soon as possible. (See page 58 for
the oil change procedure.)
1
TIP
The oil change tripmeter will flash only
when the snowmobile is stopped.
To return to the previous display mode,
push the "SELECT" button. To display the
oil change tripmeter again, turn the key to
the off position, then back to the on posi-
tion.
After changing the engine oil, reset the oil
change tripmeter as follows.
To reset the oil change tripmeter (when the
engine oil was changed after the oil change
tripmeter appeared)
1.
To display the oil change tripmeter, turn
the key to the on position.
E LO
Advertisement
Table of Contents
