Software Update - LG HU85LA Service Manual

1. Main Software Download
(1) Download the firmware for that model from the LGE site.
(2) Create an LG_DTV folder at the root of the USB memory.
(3) Copy the downloaded model's firmware to the LG_DTV folder.
(4) Turn on your projector and insert the USB memory.
(5) "Software update" Popup displays after 10 seconds.
(6) Select "Yes" , using right arrow key. Software update will begin. If you don't want to update SW Select "No".
(7) If updated successfully, Projector will be turn off automatically.
(8) You can eject USB Memory stick after Projector turned off.
2.Expert Mode
(1) Download the firmware for that model from the LGE site.
(2) Create an LG_DTV folder at the root of the USB memory.
(3) Copy the downloaded model's firmware to the LG_DTV folder.
(4) Turn on your projector and insert the USB memory.
(5) If the software pop-up window appears, close it
(6) Press the [IN START] button on the remote control, in the [System3] menu, change the [USB Expert Mode] to Enable.
(7) Enter the Settings menu and position focus in the General menu.
(8) Press button 7 on adjustment remote control 7 times
(9) Once the SOFTWARE UPDATE UI is created, select Firmware.
(10) Click the Update button.

SOFTWARE UPDATE

- 7 -
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes.