Manual Operation For Watering - Parkside 352082 2007 Operation And Safety Notes

Select each watering day and confirm by pressing the
SET button
After select the watering days, press the
final confirm.
The display on the "Prog" will flash on screen.
9. Select the "Prog ON" with the rotary button and confirm
by pressing the SET button
you don't want to activate the program at this moment).
After setting up the first program, the system will now jump
back to step 2, so you can set up program No. 2–6.
When you have finished setting up the programs, you can
press the
mode and go back to the normal operation mode.
Remark: In case you input a wrong data, you can always
press the (ON/OFF) button

Manual operation for watering

The valve can be opened or closed manually at any
time. A program-controlled open valve can be closed early
without changing the program data (watering start time, run
time and frequency).
(see Fig. 11).
4
(ON/OFF) button
(or you can select OFF if
4
to exit the programming
7
to go to previous step.
7
button to
6
GB/IE 63