Advertisement
Overview (continued)
Contents
Your system includes one solar collector, along with mounting hardware, connection
hardware, and integrated bypass valve. See the list below for the contents of your ex-
act system:
Component
4' x 20' Wide Solar
Collector with 1-1/2"
barb connections
Mounting Cap
Mounting Base
Mounting Strap
Valve Handle
Rubber tube plugs
Flexible Pool Hose
Additional materials required:
- 1-1/2" I.D.flexible hose
- Ground spikes (ground installation)
- Optional roof or rack mounting:
* Mounting screws (1/4" x 2" long, outdoor screws) & roof sealant
* Ground rack lumber and materials
Tools required:
- Flat head screwdriver or 5/16" nut driver
- Optional roof or rack mounting:
* Power drill with 1/8" pilot drill bit and a Phillips head bit
975-3
1
12
12
6
1
20
Rigid PVC Pipe
Additional materials required
- Mounting screws (1/4" x 2" long, outdoor screws) & roof sealant
- PVC primer, PVC cement, and PVC fittings
- (2) 1-1/2" PVC tees, (6) 1-1/2" PVC elbows (varying with installation)
- 1-1/2" Sch.40 PVC pipe to connect solar system to pool equipment
Tools required:
- PVC pipe cutters or equivalent
- Flat head screwdriver or 5/16" nut driver for tightening hose clamps
• Power drill with 1/8" pilot drill bit and a Phillips head bit
2
Advertisement
