------------- Content------------- Operating Instruction...2-6 Setting the Clock...7 Care and Maintenance...7 AM and FM Reception In a Mobile Environmen...8 Some Facts About AM and FM Reception...8 FM Reception While You Are Driving...9 Specifications...10 Warranty...11 Wiring Diagram...12 - 1 - OPERATING INSTRUCTIONS ①.
OPERATING INSTRUCTIONS appears on the display panel. Within 5 seconds of choosing, turn the control counter clockwise to decrease the bass response or clockwise to increase it as desired. The level will be shown on the display panel from a minimum of BAS: -7 to a maximum of BAS: +7 (0 indicates flat response).
Page 4
OPERATING INSTRUCTIONS The pre-set number (M1-6) will appear on the display panel, indicating that the station is now set into that pre-set memory position. The station can now be recalled at any time by pressing that button. 4. Repeat the above procedure for the remaining 5 presets on that band and for the other 4 bands on the unit.
SETTING THE CLOCK SETTING THE CLOCK 1.Switch the vehicle ignition and radio "on" . 2.Press and hold the T/F button until the time (hour) display begins to flash. 3.With the hour display flashing, press the TUNE - button to decrement the hours indication, or the TUNE + button to increment the hour indication.
FM RECEPTION WHILE YOU ARE DRIVING FM RECEPTION WHILE YOU ARE DRIVING Since FM signals become weaker as you drive further from the broadcast station, you may experience flutter, noisy reception and fading in the poor signal fringe areas. Through the use of advanced circuitry in this radio,the "Fringe Area"has been greatly reduced, providing a larger reception range.
WIRING DIAGRAM OPERATING INSTRUCTIONS WARRANTY 90 DAY / 12 MONTH LIMITED WARRANTY AUDIOVOX SPECIALIZED APPLICATION,LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor.