Napa Carlyle DSD14 Instruction Manual page 7

TRACK MODE OPERATION
START
Setting Target Torque
Apply Torque
Current Torque Value
Reach 90% of Target Torque
Current Torque Value
((...((... ...))...)) ((...((...
Buzzer
(((((((( ))))))))
Buzzer
Note:
1. If appears, it means the screwdriver has
been torqued to more than 110% of maximum torque.
2. The green LED will be on for 90% of target torque.
3. When reaching the target torque, the green and red
LED will be on at the same time.
DSD14
(System initial)
N-m
*Note 1
M T
N-m
M T
N-m
M T
*Note 2
...)) ...))
Green LED
Reach 90% of
Target Torque
Reach Target Torque
N-m
M P
((((((( )))))))
*Note 3
Red LED
Reach Target Torque
PEAK HOLD MODE OPERATION
START
(System initial)
N-m
M P
Setting Target Torque
Apply Torque
N-m
P
Current Max. Value (Peak Hold)
Reach 90% of Target Torque
N-m
M P
Current Torque Value
((...((... ...))...)) ((...((...
Buzzer Green LED
Reach 90% of
Target Torque
Reach Target Torque
N-m
M P
(((((((( )))))))) ((((((( )))))))
Buzzer Red LED
Reach Target Torque
7
*Note 1
Released
Apply Torque
Apply Torque
*Note 2
...)) ...))
*Note 3
N-m
P
Rev. 03/01/12