Napa Carlyle DSD14 Instruction Manual page 4

AUTO POWER OFF
• The screwdriver will auto power off after about
5 minutes idle for power saving. Press to
power on the screwdriver again.
RESETTING THE SCREWDRIVER
• If the screwdriver does not function normally, loosen the
battery cap, then tighten it to re-start.
SETUP
1. Power On/Clear Button
2. Unit Selection/Setting Button
3. Pre-setting No. Button
4. Adjust Torque Value Button
DSD14
2
1
4
3
4
Rev. 03/01/12