Page 2
These instructions cover the installation of the AV-V70-KIT (70Vrms Speaker Circuit Interface Card and Audio Converter Transformer) to an Advanced AV-V70 universal audio converter. Caution: Before installing, servicing or removing any printed circuit boards / transformers remove all sources of power.
Page 3
70Vrms Speaker Circuit Wiring (see figure 2): [1] The 70Vrms Speaker Circuit Interface Card can be wired to the 70Vrms speakers either via Class A or Class B wiring. If wiring Class B, set 70Vrms speaker circuit output style wiring jumper to B and wire terminals B+ and B- of the 70Vrms Speaker Circuit Interface Card to each speaker and terminate the wiring with a 100K end-of- line resistor [EOL].
Need help?
Do you have a question about the Axis AV-V70-KIT and is the answer not in the manual?
Questions and answers