KWIK GOAL 10B4608 Assembly Instructions page 3

Goal anchor weights
Table of Contents

Advertisement

If net is already attached, unclip net from back bottom bar or crossbar. Set anchor weight over back
4.
bottom bar or crossbar at four evenly spaced locations as shown. Clip net to goal as close to the
anchor weight as possible.
Anchor Weight
Bottom Bar or Crossbar
Anchor Weight
Anchor Weight
***CAUTION***
All sports equipment must be anchored at all time. Sports equipment must have the proper amount of
counterbalance weight and be attached in locations stated by Kwik Goal instructions. Do not move sport
equipment with counterbalance weight attached. Sports equipment not in use must be diassembled and stored
in a safe, secure place. Assembled sports equipment should not be left unattended. Do not use any sports
equipment during the threat of high winds. Sports equipment should be checked for safety on regular basis. Any
modifications to this or any Kwik Goal product will void any and all warranties.
NZ467 Rev. 09/08/21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 10B4608 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents