Advertisement
INTRODUCTION
SAFETY ALERT SYMBOL AND SIGNAL WORDS
The precautions and warnings included in this manual as well as the safety signs attached to the machine
must always be observed. These enable you to use the machine safely and prevent injury to operators,
service personnel and bystanders.
Identify important safety messages in the manual and on machine labels with the safety alert symbol
(Exclamation point in triangle), followed by key signal words.
The safety alert symbol (Exclamation point in triangle) identifies important safety messages on machines, in
manuals and elsewhere. When you see this symbol, be alert to the risk of personal injury or death. Follow the
instructions in the safety message. The following signal words are used to inform you there is a potentially
hazardous situation that may lead to personal injury or damage to the machine.
The following signal words alert you to information that must be followed to avoid damage to the machine.
NOTICE
This precaution is given where the machine may be damaged or the service life reduced if the
precaution is not followed.
REMARK
This word is used for information that is useful to know.
PC240LC-10
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury. This signal word is limited to the most extreme situations.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
SAFETY ALERT SYMBOL AND SIGNAL
WORDS
1-3
Advertisement
