Remote Control - 2x3 HT-Z Series User Manual

The followings description the functions of the buttons on the Control Panel
POWER
Press this button to turn on the document camera. The guiding light underneath will switch from
red to blue. To turn off the document camera, press this button for 3 seconds or more. The guiding
light will change back to red.
NOTE: The document camera will default the previous output signal.
PROJECTOR/ CAMERA SWITCH
Press this button to output information from the document camera to a projector. The guiding light
beneath the button will be in green when this function is in use.
COMPUTER/IMAGE SINGAL SWITCH
Press this button to output the information from the document camera to a computer. Information
will be outputted in either COMPUTER (IN), VGA (IN) or VIDEO (IN) mode and sound will be synchro-
nized at the same time.
NOTE: The computer signal can only be outputted from the projector. The video signal can only be
output from S-Video / Video OUT.
AUTO
Press this button to automatically adjust the White Balance and Focus
ZOOM IN (ENLARGE) / ZOOM OUT (REDUCE) IMAGE
SPLIT / FREEZE IMAGE
OPERATION GUIDANCE OF THE REMOTE CONTROL
The followings describe the functions of the buttons on the Remote Control.
POWER
Press this button to turn on the document camera. The guiding light beneath will switch from red
to blue. To turn off the document camera, press the "POWER" button again. The guiding light will
change back to red.
INVERSE
Press the "INVERSE" button to rotate the image by 180°(depending on the product model, image
can be rotated by 90° or 270°). Press the "INVERSE" button again to call back the image at previous
orientation.
F
spis treści | содержание | table of contents
37