Cleaning - Lacor 69132 Instructions For Use And Maintenance Manual

8.- At any moment when heating or cooking, you can press the "TEMP/HEATING" button which
will allow you to alternate between the information shown on the screen in power (W) or in
temperature (ºC). By default, the value shown is power.
9.- When power is selected as the value, the red light next to the word "HEATING" will come on.
When control is done through the temperature, the light next to the word "TEMP" will come
on.
10.- Set the cooking time.
a.- Select the desired level of power or temperature by pressing the up and down buttons.
b.- Press the button "TIMER".
c.- Press the button with the up arrow to set the cooking time up to a maximum of 180
minutes. If you need to, use the down arrow to correct the cooking time.
d.- Press the "TIMER" button again to set the time. Once the cooking time is up, the
plaque will BEEP 5 times and will then switch off automatically.
11.- Once you have finished using the appliance, press the "ON/OFF" button to turn off the
plaque. The ventilator will continue to function for a few seconds to prevent heat bags
inside the plaque.
1.- Always turn off and unplug the appliance before cleaning it. Wait until it is at room
temperature.
2.- Never use any chemical or abrasive products. Do not use a brush or any other type of
utensils which could damage the different parts and surface of the slicer.
3.- Use a damp cloth with detergent to clean the machine and then dry it. Make sure to clean
the machine completely every day.
4.- ATTENTION: Do not put the machine directly into any container with water in it.
This machine is not waterproof.
36

CLEANING