Advertisement
Quick Links
Advertisement
Related Manuals for UMAGE EOS
Summary of Contents for UMAGE EOS
- Page 1 assembly guide...
- Page 2 Please give the feathers time to readjust to their original shape. It may take up to two weeks, but you can help them along by running your f ingers carefully through the feathers.
- Page 3 IN THE BOX - or - Find assembly videos by using the QR code or by going online at our website umage.com/instructions...
- Page 4 ATTACH THE CORD SET AND BULB TO THE FRAME MAX 15W LED bulb!
- Page 5 EXPAND EOS Widen the lamp by pulling from the top and bottom holes.
- Page 6 INSERT FRAME Insert the frame into the Eos lamp by attaching the hooks to the rings.
- Page 7 EOS XX-LARGE...
- Page 8 EOS XX-LARGE...
-
Page 9: Cleaning Tips
Cleaning tips Keep the lamp clean using a hair dryer on the coolest setting, 25 cm (10”) from the lamp and blow the loose dust from the feathers. Use a damp cloth for dust that is diff icult to remove. Always keep the lamp away from f ire. - Page 10 Tripod floor assembly guide...
- Page 11 ! IMPORTANT ! Tripod table stand safety instructions (Read and keep these instructions for future reference) Product name: Tripod floor Model no.: 401 1, 4012 Rating parameter: 120V, 60HZ, AC ONLY Lamp type: E26 Type A / 60W MAX NOTE: THIS INSTRUCTION SHEET COVERS A VARIETY OF STANDS (DIFFERENT COLORS), BUT WITH THE SAME APPLICATIONS.
- Page 12 4. Insert the plug into a suitable outlet contact UMAGE Service Center or and turn on the power supply. call a qualified electrician. 5. Press the cord-switch to on.
- Page 13 NOTE: DO NOT try to repair the tripod 13. Do NOT touch the light bulb imme- diately after the light is turned off. Be if the product, cable, socket or the lamp- aware of possible scalding! shade is in any way broken or not as 14.
- Page 14 MAX 60W >100 mm >100 mm Find assembly videos by using the QR code or by going online at our website umage.com/instructions...
- Page 15 If the external f lexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or a similar qualif ied person, in order to prevent any possible hazards.