Advertisement
INSTALLATION INSTRUCTIONS
Apply thread sealant onto the threads of the spray shank.
‰
Connect the flexible hose from the transfer valve onto the
spray shank.
Connect the supply hoses to the supply tee via the quick-
‰
connect fittings.
Insert a rubber gasket and nylon washer into the supply tee
‰
outlet.
Thread a flexible hose into the supply tee outlet.
‰
Slide the gasket onto the transfer valve/vacuum breaker
‰
shank.
Connect the flexible hose from the supply tee outlet onto the
‰
transfer valve/vacuum breaker shank.
Connect the supply hoses from the valve assemblies to the supply
‰
stops. (Left is hot - right is cold).
Tighten all connections.
‰
Connect the tailpiece to the P-trap (as needed).
‰
Ensure that all connections are tight.
‰
Open the drain.
‰
Turn on the main water supply and check for leaks. Repair as needed.
‰
Remove the spray head.
‰
Open both the hot and cold valves and run water through the transfer valve and spray
‰
assembly for about a minute to remove debris. Check for leaks.
Turn off the water.
‰
Reinstall the spray head.
‰
1087125_2_B
5 of 5
7.
FLeXIBLe hOSe INSTALLATION
8.
SUPPLY CONNeCTIONS
9.
INSTALLATION CheCkOUT
Nylon
Washer
Rubber
Gasket
Supply
Tee
Supply Hose
Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Bidet Faucet
Spray Head
Assembly
Shank
Apply
Thread
Sealant.
Plastic
Flexible
Hose
Transfer Valve/
Vacuum Breaker
End Body
Valve
Gasket
Quick-
Connect
Fittings
Supply Hose
Spray Head
Spray
Assembly
Advertisement
