THIS COPY IS NOT SIGNED SINCE IT IS FILED AND DELIVERED BY MEANS OF THE AUTOMATIC KNOWLEDGE MANAGEMENT SYSTEM (IT CAN BE SIGNED ON REQUEST). THIS DOCUMENT AND THE DATA CONTAINED HERE IN, IS
PROPRIETARY PROPERTY AND SHALL NOT BE DUPLICATED, USED OR DISCLOSED – IN WHOLE OR IN PART – FOR ANY PURPOSE WITHOUT WRITTEN CONSENT OF OCEM.
Document UT-MT-0699
Supersedes edition 12/02/2019
LIGS01
AND MAINTENANCE
Approved by: M.Mazzotti
Copy n°:
Via della Solidarietà 2/1 – 40056 Valsamoggia - Italy
Page 1
THIS COPY IS NOT SIGNED SINCE IT IS FILED AND DELIVERED BY MEANS OF THE AUTOMATIC KNOWLEDGE MANAGEMENT SYSTEM (IT CAN BE SIGNED ON REQUEST). THIS DOCUMENT AND THE DATA CONTAINED HERE IN, IS PROPRIETARY PROPERTY AND SHALL NOT BE DUPLICATED, USED OR DISCLOSED – IN WHOLE OR IN PART – FOR ANY PURPOSE WITHOUT WRITTEN CONSENT OF OCEM.
Document UT-MT-0699 Page 2 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE EDITIONS Date 16/03/2020 Added derivation option, general update, removed attachment 1 12/02/2019 Added two size tables transformers case SCR and Sinusoidal...
Document UT-MT-0699 Page 3 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE INDEX EDITIONS ............................2 REVISIONS ............................2 LIST OF EFFECTIVE PAGES ........................2 INDEX ..............................3 INDEX OF FIGURES ..........................4 INDEX OF TABLES ..........................
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE GENERAL The internally LEDs illuminated LIGS01 signs are designed to be used on airport taxiways and runways to convey a mandatory instruction, information on a specific location or destination on a movement area or to provide other information to meet the requirements of Surface Movement Guidance.
Page 7 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE Electrical Data 3.2.1 Current Power Supply The luminous signs are powered by series circuits through isolating transformers, meeting FAA...
Page 8 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE 3.2.2 Voltage power Supply The light signs are powered with voltage 230V / 50Hz, through transformers 230V-37V / 50Hz, of...
6.6 A NOTE: the electrical and luminous data are referred to constant current regulators and isolating transformers manufactured and/or distributed by OCEM. The data may change with constant current regulators and/or transformers manufactured by other Companies. Description of the Signs...
Page 10 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE 3.4.2 Panels for Faces The panels for faces are made of high performance methacrylate 5 mm thick. The legend is obtained by means of adhesive coloured translucent films applied to the internal side of the panel.
Page 11 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE 3.4.4 Electronic Boards 3.4.4.1 Current power Supply In case of current supply, the sign is equipped with a current converter completely assembled on an encapsulated electronic board.
Page 12
Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE b) Remove the sign from the relevant packing. c) The signs are normally installed so that the cable entry is located toward the runway or taxiway edge.
Page 13 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE IMPORTANT CONNECT THE GROUND CABLE of the airport circuit to the ground terminal of the sign located on the bottom panel of the sign itself (6 mm2 recommended).
Document UT-MT-0699 Page 15 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE MAINTENANCE ATTENTION! Never operate on electrical and electronic equipment while the CCR is ON. Periodical Checks Daily...
Page 16 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE Electronic Equipment Replacement If troubles to the electrical/electronic are suspected proceed as follows: a) Be sure that the series circuit is de-activated (regulator unit CCR off or Main switch of the 230Vac line open according to the type of sign);...
Document UT-MT-0699 Page 26 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE LIST OF RECOMMENDED SPARE PARTS Article Description power supply board (Voltage Power Supply) RISLG0034 Ric. SCH.F238 230V/37V LSDS/LIGS...
Document UT-MT-0699 Page 27 di 27 Edition 12/02/2019 26/07/2016 Supersedes edition LED LUMINOUS GUIDANCE SIGN LIGS01 INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE ACCESSORIES Article Description 013.0010 Set of two ryton rings for receptacle support inside pipe elbow 013.0008 Galvanized steel pipe elbow with upper threaded end only 315.3210 Galvanized steel pipe elbow with both threaded ends...