Download Print this page

Nyos TORQ G2 Quick Start

Download this manual

Step 03 Insert TORQ

G2 Body and start operation

(Fig. 6)

Removal position

(Fig. 7)

Setting the flow rate

1. Fit the body on the dock in the removal position

(Fig. 6)

2. Plug in the dock

3. It is possible to change the flow rate by rotating

the body (Fig. 7)

4. Set the flow rate so that the filter media will be

hold in suspense

NOTE: A smear layer will form after a few days.

This will result in a quieter return flow and bubble

formation will reduce.

Manufactured by

Nyos

Aquatics GmbH

Siemensstr. 26

70825 Korntal-Muenchingen, Germany

www.nyos.info, support@nyos.info

NYOS

TORQ

Full instructions and safety information

Step 01 Positioning the TORQ

G2 Dock in the sump

(Fig. 1)

G2 QUICK START

Video instructions and tips

• In sump use only

• Avoid contact to side panes

• Only plug in, when the body is on the

dock

Page 1 Removal position • Avoid contact to side panes Manufactured by Nyos Aquatics GmbH • Only plug in, when the body is on the ® Siemensstr. 26 dock 70825 Korntal-Muenchingen, Germany (Fig. 7) www.nyos.info, support@nyos.info (Fig. 1) Setting the flow rate...
Page 2 Step 02 Filling the TORQ G2 Body ® Filling with two filter media (only TORQ G2 Body 1.0 and Body General Information ® 2.0) • The lower insert and lid can be removed from the tube with a slight turn (Fig. 2) 1.