Mode - Adjusting The Volume, Fader And Balance - Alpine DVA-5205P Owner's Manual

MODE – Adjusting the volume, fader and balance
Use the "Joystick" to select the
speaker, then press "ENT".
Adjust so that the volume level from the
different speakers is the same.
ENT
Use the "Joystick" to adjust the
level, then press "ENT".
ENT
Note: Press "RTN" to return to the previous
screen.
Once the levels of
all the speakers
have been
adjusted, either
set "TEST TONE" to
"OFF" or press "A.PROC" to close
the digital audio processor screen
and return to the playback screen.
MODE –
Adjusting the volume,
fader and balance
When a head unit is connected using Ai-NET
connections, adjust the volume, fader and
balance from the head unit.
ENT
Select "MODE" under "Operating
the digital audio processor
(optional)" on page 40.
Use the "Joystick" to select the
item to be adjusted, then press
"ENT".
ENT
Use the "Joystick" to adjust.
Note: Press "RTN" to return to the previous
screen.
Press "A.PROC"
to close the
digital audio
processor screen
and return to the play-
back screen.
DVD
ENT
ENT
ENT
Video CD
CD
53