Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rompa Wizard of 'SnOeZ'
Summary of Contents for Rompa Wizard of 'SnOeZ'
- Page 1 1. Product Name Wizard of ‘SnOeZ’ 2. Product Code 20713 3. Colour As shown above 4. Brief Description Spellbinding! Magically multi‐sensory! Fantastic way of encouraging understanding of ...
-
Page 2: Detailed Description
6. Snoezelen® Stimulations • Touch • Sight • Sound 7. Best Use Use on a flat, stable surface. 8. Compatible ROMPA® Products Please see www.rompa.com for our extensive range of interactive products. The Wizard should not be used with any accessories. 9. Starting Up • Given the importance of assembling this product correctly, please read all these instructions before installation, and before first use. 10. Detailed Description Spellbinding! Magically multi‐sensory! Fantastic way of encouraging understanding of cause and effect. Tactile, interactive and enchanting! With lights, sounds, audible message and vibration. His wand lights up and he even winks! Volume and brightness controls at the rear. Lights and sounds can be configured or switched off using your PC to suit individual client's needs. ... - Page 3 10. Detailed Description continued FUNCTIONS Star button one: Press the star button to light up star display one with colours and to play audio messages. Subsequent presses activate star display one and star display two simultaneously. See table below. Star button two: Press the star button to light up the wand with colours and to play audio messages. Subsequent presses activate different patterns in different colours. See table below. ...
- Page 4 Star button three: Press the star button to obtain a random effect and audio message with each press. See table below. Star button four: Press the star button to light up the eyes (inner and/or outer) with bright colours and to play audio messages. Subsequent presses activate different patterns in different colours. See table below. ...
- Page 5 Star button five: Press this star button to light up the star display with bright colours and to play audio messages. Subsequent presses activate different coloured patterns and sounds. On the last press the wand sequence runs as a reward for working through the patterns. See table below. ...
- Page 6 Star button six: Press this star button for sensory feedback and to play an audio message. Subsequent presses re‐activate the fan and obtain brightly coloured effects from star displays one and two. See table below. ...
- Page 7 Vibration / button orb: Press the orb held in the Wizard’s hand to activate bright lights and vibration. Subsequent presses activate different coloured patterns and sounds. See table below. ...
- Page 8 Rotary star: Rotate to the star left or right to make the lights on the star display two trace your movements and to activate audio feedback. Subsequent rotations activate different coloured patterns on star display two and the orb. See table below. ...
- Page 9 Glove Box: Insert your hand into the glove box to trigger bright lights and sound. By moving your hand deeper into the glove box the colour will change and the volume of sound increases. Removing your hand has the reverse effect. See table below. ADVANCED FEATURES Restoring original configurations: To upload the default configuration back into the Wizard memory, first switch off the Wizard and unplug. Insert the supplied USB stick into the rear control panel. Switch the power back on and wait 2 minutes. An audible ‘beep’ will sound once the configuration has been uploaded. After this ‘beep’ remove the USB stick. 11. Safety • Always supervise the use of this product. • Do not attempt to modify this product. • For indoor use only, on a flat, level and stable floor. • Keep this product away from naked flames, cigarettes and sources of heat including open fires, radiators and heaters. • Do not attempt to use any accessories or any parts other than those supplied (e.g. use only the adapter supplied). ...
-
Page 10: Technical Specification
12. Technical Specification Size: (including plinth) 158H x 137W x 64cmD Weight: 25kg Voltage: 220‐240V AC 50Hz mains input; 12V DC output from adapter) CE: meets all relevant European safety requirements A = star buttons F = wand and star burst B = tactile eyebrows and beard G = eyes C = vibration / button orb H = loudspeaker D = fan I = star display(s) E = glove box J = rotary star ... - Page 11 12. Technical Specification continued (1) Full input parameters: ...
- Page 12 12. Technical Specification continued (2) Full output parameters: ...
-
Page 13: Installation
• Do not soak or immerse any parts of the Wizard in water. • Store the product in a cool dry place out of direct sunlight. • Do not use bleach, solvents, abrasives, synthetic detergents, wax polishes, antibacterial sprays or wipes. Checks • Check that there are no loose, damaged or missing parts. If any are found, discontinue use and contact ROMPA®. • Make sure the adapter is undamaged and in good working order. Lamps • The lamps used are LEDs and should not need replacing. ... -
Page 14: Troubleshooting
15. Troubleshooting In the unlikely event of product failure, please check the following: Problem: The configuration is corrupt • Use the USB stick provided to install the default configuration. Should you lose your USB stick, replacements can be purchased if required. • Do not use the USB stick to store any other files. Problem: I want to use different sound files for my own sounds. • Please contact ROMPA® for further information. Problem: The beard and/or eyebrows have become dirty. How can I clean these? • The material used for these is tested to ISO EN 105 for colour fastness and BS 5665 Part 1 and Part 2 for flammability. Once the Wizard is unplugged, wipe these with a damp cloth and mild detergent. Replacement parts can be purchased if necessary. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com ...
Need help?
Do you have a question about the Wizard of 'SnOeZ' and is the answer not in the manual?
Questions and answers