Download Print this page

LivingXL 500LB Assembly And Safety Instructions

Executive leather chair

Download this manual

500LB Executive Leather Chair

Page 1 500LB Executive Leather Chair...
Page 2 500 lbs on the product.
Page 3 Back Cushion Gas Lift Gas Lift Cover Base Caster Screw-30 M8*30mm Screw-35 M8*35mm Screw-55 M8*55mm...
Page 4 Align the holes of the Seat Plate (D) with the underside holes of the Seat Cushion (B), ensuring that the "FRONT" label on the seat plate toward the "front" side (see Fig.1) Assembly the Seat Plate (D) on the underside of the Seat Cushion (B) with Washers (L) &...
Page 5 Assembly the Caster (H) into the Base (G) until fixed. Insert the Gas Lift (E) to the hole of the Base (G) until it locks securely. Covered the Gas Lift Cover (F) on the Gas lift (See Fig.4). seat and back to make sure secure onto the gas lift and not seat and back to make sure secure onto the gas lift and not Put the assembled seat and backrest onto the gas lift and press it down to check in place.
Page 6 Lift and remove the seat from the gas lift (see Fig.7). Fig.7 Angle and brace the Casters and Base (see Fig. 8). Gently tap the bottom of the gas lift with a Rubber mallet (not included) until the gas Lift is released from the Base. Fig.8 LivingXL Item #:X2267...