Page 1
LivingXL 650LB X2266-Swivel Chair Assembly and Safety Instructions - FOR HOUSEHOLD USE ONLY - For product information, questions, or customer service, call toll free 1-800-535-7639 www.LivingXL.com...
IMPORTANT SAFEGUARDS Definitions Whenever used, the following terms identify safety and property damage messages and designate a level of hazard seriousness. - This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER –...
parts list part Description Illustration L1/R1 Armrest Backrest frame Seat frame Seat Plate Cylinder Base Long screw M6*30mm Short screw M8*20mm wrench 4mm wrench 5mm NOTE: Before beginning assembly, place all parts and hardware on a soft surface; ensure all listed parts and hardware are included. To Assemble TOOL REQUIRED: Allen Wrench (included).
Page 4
Assemble seat frame (C) and armrest (A) with long screw (G) M6*30mm, locking by wrench 4mm (I) See Fig.2&3. Fig.2 Fig.3 Assembly the other side as step1&2 ,see Fig.4&5. Fig.4 Fig.5 Align the holes of the Seat Plate (D) and the underside holes of the Seat Frame, assemble the seat plate and the seat frame with short screw (H)M8*20mm,locking by wrench 5mm (J).
Page 5
Put the assembled Seat frame & back frame onto the cylinder (E) and press down to secure the Seat Frame in place. See Fig.8&9 Fig.8 Fig.9 To Disassemble the Chair Two persons required for disassembly. Brace/immobilize the Base Lift and remove the Seat frame & back frame from the cylinder (see Fig.10) Fig.10 3.
Page 6
WARNING: Discontinue use of the product if it is damaged or shows any signs of instability or wear. LivingXL is a trademark of CMRG Apparel and is used under license. For product information, questions, or customer service, call toll free 1-800-535-7639...