Summary of Contents for Bath Royale MasterSuite BR283 Round
Page 1
I N STA L L AT I O N I N ST R U C T I O N S Model: BR283 Round / BR237 Elongated MasterSuite® Toilet Seat with Slow Close & Quick Release Visit us at: BathRoyale.com...
Page 3
Installation Instructions Model: BR283 Round / BR237 Elongated Tools Required: MasterSuite® Toilet Seat with Phillips Head Screwdriver Slow Close & Quick Release Tape Measure or Ruler Installation is not difficult, but it is VERY DIFFERENT from other seats. Please follow these instructions step-by-step.
Page 4
Installation Instructions Important: Mounting surface of toilet must be flat, clean and dry with no chemical residue. To prepare mounting surface, we recommend using Windex® (or any glass cleaner) around the mounting holes of the toilet to get the mounting surface squeaky clean. 1.
Page 5
Tap forward and let the seat and lid close by themselves. Tip: It is OK to push the seat and lid closed. Unlike other Slow-Close seats, Bath Royale® seats can be force-closed repeatedly, without damaging the Slow-Close mechanism. Closing too slow? Push it closed.
Page 6
Installation Instructions 7. Hand-tighten wing nuts. Put finger or thumb on screw head and push down to prevent screw from turning. Tip: Be sure the seat does not move. 8. Double check seat alignment and tighten screws very firmly. Important: To tighten properly, it is necessary to hold wing nuts beneath while tightening with screwdriver.
Page 7
Installation Instructions 10. Place mounting base covers on mounting bases. Tip: If you prefer stainless steel covers, brushed nickel and polished chrome finishes are sold separately at BathRoyale.com. 11. Replace seat. Align holes with mounting posts and carefully lower seat back into place. You will hear ‘clicks’ as the seat locks onto posts.
Need help?
Do you have a question about the MasterSuite BR283 Round and is the answer not in the manual?
Questions and answers