Advertisement
TrueNet
Connector Identification System
TracerLight Patch Cord
TracerLight optical patch cords feature a
flashing light source (LED) component near each
connector end. The TracerLight power source is
inserted with minimal force into the TracerLight
component on one end of the patch cord. This
causes the LED on each end to begin flashing
rapidly. As a result, the distant end of the patch
cord can be quickly and easily identified without
interruption of service.
Available in any standard length or connector
style, TracerLight patch cords have the same
functions, features, and stringent environmental
requirements as our standard patch cords.
Optical performance of the patch cords is
not affected by the TracerLight components.
TracerLight patch cords are installed in the same
manner as standard patch cords and can be
pulled through ADC's FiberGuide
Management System with ease. Also compatible
with ADC's Next Generation frame with term
block counts up to 144.
O r d e r i n g I n f o r m a t i o n
Description
Multimode Duplex TracerLight Patch Cords
LC-LC with 50/125 multimode laser optimized to 300m, aqua
LC-SC with 50/125 multimode laser optimized to 300m, aqua
SC-SC with 50/125 multimode laser optimized to 300m, aqua
Singlemode Duplex TracerLight Patch Cords
LC-LC Singlemode
LC-SC Singlemode
SC-SC Singlemode
XXX – Length in meters. Standard lengths: 001 = 1 meter, 002 = 2 meters, 003 = 3 meters,
1
005 = 5 meters, 006 = 6 meters, 010 = 10 meters, 015 = 15 meters.
w w w . a d c . c o m
TracerLight
®
Fiber Cable
®
Aramid Yarn
Strength
Tight
Members
Buffered
PVC
Fiber
Jacket
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
®
TracerLight Patch Cord
Duplex
PVC
26 AWG
Jacket
Copper
Wire (2)
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Catalog Number
1
FTL-PPKXXXM
FTL-9PKXXXM
FTL-99KXXXM
FTL-CCZXXXM
FTL-7CZXXXM
FTL-77ZXXXM
2
Advertisement
