Ozito PXC PXJBS-0182 Instruction Manual

Ozito PXC PXJBS-0182 Instruction Manual

Brushless jet blower

Advertisement

Quick Links

BRUSHLESS
JET BLOWER
INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
18V x 2
No Load Speed:
10,000 - 22,300/min
Max. Air Speed:
210km/hr
Max. Air Volume:
816m3/hour
Noise Rating:
94 dB
Tool Weight:
2.5kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: Nozzle.

STANDARD EQUIPMENT

Brushless Jet Blower
Blower Nozzle
Shoulder Strap
PXJBS-0182
1220

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXC PXJBS-0182 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito PXC PXJBS-0182

  • Page 1 816m3/hour Noise Rating: 94 dB Tool Weight: 2.5kg ozito.com.au PXJBS-0182 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2 BATTERY & CHARGER This tool is compatible with all battery and chargers from the Ozito Power X Change Range. Note: To use the shoulder strap simply slide the strap over your shoulder so that some of the weight of the jet blower can be taken by your shoulder.
  • Page 3 OPERATION 2. INSERTING & REMOVING THE BATTERIES 3. CONTROLS & OPERATION Inserting the Battery Pack WARNING!: DO NOT SWITCH THE JET BLOWER ON Note: Always use 2 batteries of the same capacity and same charge IN ENCLOSED OR POORLY VENTILATED SPACES state with the jet blower.
  • Page 4 Blowing The brushless jet blower is ideal for blowing leaves, grass clippings and other debris. Hold the blower firmly, squeeze the on/off trigger, point the jet of air in front of you and move forward slowly. Move the blower from side to side, with the nozzle several inches above the ground.
  • Page 5 Check with your local council authority for recycling advice. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the blower by an unauthorised person or by mishandling of the blower. This tool is designed for DIY use - use in commercial or industrial environments will void the warranty.
  • Page 6 The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. This tools charger is double insulated, therefore no earth wire is required.

This manual is also suitable for:

0293761

Table of Contents