1. VCC2 adjustment, VCC7, VEE1 voltage check
2. LLD coil adjustment
3. Free running frequency adjustment
4. Contrast adjustment
5. TINT pot adjustment
Preparations
1. Connect AVB (CP725) to GND.
2. Set SW100 on UHF mode.
Adjustment And Test Point Locations
Top View
ADJUSTMENT
VR700 : VCO free run frequency adjustment
— 3 —
VR301 : Tint adjustment
VR300 : Contrast adjustment
T200 : LLD Coil adjustment
VR100 : VCC2 adjustment
Bottom View
Need help?
Do you have a question about the TV-880C and is the answer not in the manual?