Arrow ROT4500K-A Manual page 18

USEFUL HINTS & TIPS (Cont.)
6. Always ensure that you have maximum contact between
the accessory shaft and the collet chuck.
7. Vary the speed on the tool for the work in hand, eg. Low
speed for polishing and cleaning and high speed for
engraving.
ACCESSORIES INCLUDED WITH KIT
18
POWER TOOL OPERATION
Uses Specifications
Cutting 5pcs 1.25" (32mm) fiberglass reinforced
cut-off wheels
Sanding 1pc ½" (12.7mm) sanding drum
8pcs ½" (12.7mm) sanding bands
30pcs 20mm sanding papers
Polishing 2pcs 1" (25mm) polishing wool wheels
Grinding 2pcs aluminum oxide grinding stones
1pcs silicon carbide grinding stone
Mandrels 1pc mandrel for polishing/cut-off wheel
Collets 1pc mandrel for polishing wool wheel