English - Cisco Linksys WRT400N Advanced Setup And Configuration

English

NOTE:
and configure the router . Advanced users can optionally use
these instructions to configure the Router .
1.
Ensure that your Router is connected properly to your network and
powered on (the Power LED is lit) .
2.
Open your web browser . Enter
http://192.168.1.1 in the Address
field . Press Enter .
3.
On the login screen, leave the
User Name field blank, and enter
the default password, admin,
in the Password field . (For
added security, you should later
change the password using the
Administration > Management
screen of the browser‑based
utility .) Then click OK .
4.
The browser‑based utility appears . Select the Internet Connection Type
setting as requested by your ISP . For detailed configuration information,
refer to the utility's online help pages or call Technical Support .
Automatic Configuration - DHCP
If you are connecting through
DHCP or a dynamic IP address
from your ISP, keep the default,
Automatic Configuration -
DHCP .
Cisco recommends running the Setup Wizard to connect
Access the Web‑Based Utility
Login Screen
Automatic Configuration ‑ DHCP
2