LCN 8310-2210 Series Installation Instructions Manual

Model 8310-2210
Description
Actuator
Available faceplates:
Single gang: 2-3/4" x 4-1/2" stainless steel, fits on single gang electrical boxes.
Receiver
• 3 Modes of Operation:
• Delayed (1 - 15 Seconds)
• No Delay (1 – 30 Seconds)
• Latching
• Adjustable Range: 3' - 300'
• 40 Transmitter capacity: delayed, non-delayed or both
Technical specifications
Actuators
Descriptions
Number of IR sensors
Batteries (supplied)
Estimated battery life
Standard operating range
Operating mode
Inputs
Wireless output
Receivers
Descriptions
Operating voltage
Current Draw
Response time
Memory delay & No delay
LEDs
Output
Rating
Operating time
Delay time
Frequency
Mounting
Enclosure
Dimension
8310-2210 Series Touchless Actuator/
Transmitter Battery Powered Contactless Switch
8310-2210 Series
1
"AA" alkaline batteries
2 years (based on 100 operations/day)
1" - 12" (25.4mm - 304mm)
Factory set to 6" (152mm)
Momentary
"Request to Exit" (to trigger the relay remotely or from the other side of the door)
Built-in 915 Mhz. spread spectrum wireless transmitter
8310-2210 Series
12/24V AC/DC
23 mA nominal @ 24V AC/DC
43 mA maximum @ 24V AC/DC
30 - 200 ms
40 transmitters total
Indicate: relay status; learn mode; erase mode; and potentiometer position
1 x SPDT relay contact
3 amps @ 30 VDC
1 - 30 seconds
1 - 15 seconds
915 Mhz
2 #4 screws at 3" centers or hook and loop fastener (supplied)
Clear plastic case
2-5/8" x 1-1/2" x 13/16"
• Form 'C' Relay Output
• 12/24V AC/DC operation
• 915 MHz
• Dimensions: 2-5/8" x 1-1/2" x
13/16"
Installation Instructions