LCN 8310-852 User Manual

1 Description
6" ROUND
8310-852TWP (shown)
8310-852WP (not shown)
2 Specifi cations
DESCRIPTION
DIMENSIONS
WEIGHT
MATERIAL
FREQUENCY
CERTIFICATION
3 Precautions
Shut off all power going to header before attempting any wiring procedures.
Maintain a clean & safe environment when working in public areas.
Constantly be aware of pedestrian traffi c around the door area.
Always stop pedestrian traffi c through the doorway when performing tests that may result in unexpected reactions
by the door.
ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling
any board ensure you dissipate your body's charge.
Always check placement of all wiring before powering up to insure that moving door parts will not catch any wires
and cause damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.
DO NOT attempt any internal repair of the sensor. All repairs and/or component replacements must be performed
by LCN, Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.
75.5316.00 20080111
8310-852/-853
4.75" SQUARE
8310-853TWP (not shown)
8310-853WP (shown)
SPECIFICATION
6" Round: 6.33"R X 1.45"D (160.80m X 36.87mm)
4.75" Square: 5.12"H X 5.12"W X 1.42"D (130.0mm X 130.0mm X 36.1mm)
6" Round: 1.2 lbs (0.54 kg)
4.75" Square: 1.04 lbs (0.47 kg)
ABS Plastic and Stainless Steel
433 MHz
FCC
WIRELESS PUSHPLATES
WIRELESS STAINLESS STEEL ACTUATOR SWITCHES
HEX KEY
MOUNTING
PLATE
HOUSING
ASSEMBLY
FACEPLATE
USER'S GUIDE
8310-852TWP SHOWN
Page 1 of 3