Next WESTCOTT BED Assembly Instructions

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all the parts before beginning assembly.
• Keep ttings out of children's reach and keep children well away from construction area.
• A minimum of 2 persons is required to assemble this product.
• We recommend that the packaging is used to protect the surfaces during assembly.

PRODUCT INFORMATION

• Fabric content - 50% Cotton, 50% Polyester.
• Foam is supplied to protect the front face. Do use the foam to protect the main face during assembly.
• Made in China.

CARE INSTRUCTIONS

• Hair products such as hairsprays, oils and gels may a ect the finish. Avoid prolonged contact with such products.
• Regular cleaning is essential to avoid build up of these products on the surface.
• Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources such as
radiators.
• Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and soak up any
liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet cloth.
• If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry naturally.
• For more stubborn stains a professional upholstery cleaner should be consulted.
• Clean periodically in situ using a professional cleaning company.
• All assembly xings should always be tightened properly and periodically check all fixings and tighten if necessary.
WESTCOTT BED
ASSEMBLY INSTRUCTIONS.
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WESTCOTT BED and is the answer not in the manual?

Questions and answers

Summary of Contents for Next WESTCOTT BED

  • Page 1 WESTCOTT BED ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0333 777 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS STEP ONE 1. Screw 2 x legs 4 to headboard 1. Tighten with hand. 2. Screw 2 x legs 4 to footboard 2. Tighten with hand. Page 2 of 4...
  • Page 3 STEP TWO 1. Attach 2 x side rails 3 to headboard 1 using 4 x bolts (A), 2 x dowel (D), 4 x half moon washers (E) and 4 x nuts (F). Tighten with Spanner (M). STEP THREE 1. Attach 2 x side rails 3 to footboard 2 using 4 x bolts (A), 2 x dowel (D), 4 x half moon washers (E) and 4 x nuts (F).
  • Page 4 * Number of slats and caps vary dependant on size. Quantities as shown in FITTINGS and PARTS sections. Note: Double 13 x Slats King 14 x Slats Super King 14 x Slats STEP THIRTEEN Next Retail Ltd, Desford Road, Leicester, LE19 4AT Page 4 of 4...

Table of Contents