Device Status And Led Indications - Emerson GO Real-Time 4G/5G Global User Manual

Device Status and LED Indications

Battery Fuel Gauge
View remaining battery capacity (denoted with a battery icon) after activation with a quick press of
the center status button.
Four LEDs indicate remaining battery capacity based upon estimated voltage upon activation:
•Red Only: Less than or equal to 20% capacity or 3.2V
•Red + Orange: Less than or equal to 40% or 3.6V
•Red + Orange + Yellow: Less than or equal to 60% or 3.8V
•Red + Orange + Yellow + Green: Greater than 60% capacity or 3.8 V
Battery Fuel Guage: Indicates
remaining battery capacity
Network Status Indicator
Network Status Indicator
Airplane Mode
Two independent methods are deployed to disable transmissions when the GO Real-Time 4G/5G
Global Tracker is included in air freight shipments.
1. A cellular over-the-air (OTA) command is given through the Oversight Dashboard to
disable transmission through a defined geo-fence database. A user can also specify
through a database configuration a duration for the unit to re-enable transmissions or
come
out of airplane mode.
2. An accelerometer-based algorithms disables transmissions based upon aircraft takeoff
and landing.
When Airplane Mode (denoted by an airplane icon) is activated, a
for a 30 second duration. The same sequence occurs for de-activation.
5
Red Orange
< 20% < 40%
Solid Blue LED
Searching for network
Yellow Green
<
60%
< 60%
Flashing Blue LED
Registered to network
BLUE LED flashes every 1 second