Advertisement
email:
info@riverside-furniture.com
Steps:
1. Lean the back of the Headboard against the wall where the Bed will be
assembled.
2. Install two All-Thread Bolts (R-B) into the metal threaded inserts installed in the
Headboard Legs and into the metal inserts on the Footboard.
3. Carefully position one end of one Bed Rail (R-A) onto the All-thread Bolts on
the Headboard and connect using the Arc Washers (R-D), and Hex Nut (R-C).
Only partially tighten the Nuts until the Footboard has been connected. Repeat
for other Bed Rail.
4. Position and connect the Footboard (F-A) to the other end of the Bed Rails,
attaching as in the previous Steps.
5. Carefully align the Footboard and Headboard to be 'square' with the Side Rails.
Using the Open Wrench (R-E) tighten all Hex Nuts attaching the Side Rails to
the Headboard and Footboard. (See Detail E).
H-C
H-B
Joelle
King Bed
Assembly Instructions
H-A
R-A
Page 4 of 6
Made in Viet Nam
R-A
F-B
Advertisement
