Lenovo ThinkPad L13 Gen 2 User Manual page 50

Replacement procedure for the short M.2 solid-state drive
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 41.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 42.
5. Remove the M.2 solid-state drive:
a. Remove the screw that secures the M.2 solid-state drive bracket
state drive with the bracket out of the drive slot
b. Turn over the M.2 solid-state drive with the bracket and remove the screw
solid-state drive from the bracket
44
L13 Gen 2, L13 Yoga Gen 2, S2 Gen 6, and S2 Yoga Gen 6 User Guide
2 .
2 .
1 . Then, remove the M.2 solid-
1
. Then, remove the M.2