Lenovo ThinkPad L13 Gen 2 User Manual page 33

7. USB 3.2 connector Gen 1
9. Security-lock slot
11. HDMI connector
13. USB 3.2 connector Gen 2
Attach a docking station
Notes:
• ThinkPad Basic Docking Station does not ship with a system lock installed. If you do not purchase and
install a system lock, skip step 4 and step 7 in the following instruction.
• If you do not connect the docking station to ac power, the computer attached runs on battery power.
1. Connect the docking station to ac power.
2. Disconnect the cables and devices from the left side of the computer.
3. Turn the system lock key to the unlocked position (
4. Align the top-left corner of the computer with the guide post of the docking station. Attach your
computer to the docking station as shown
shown 2 .
5. Check the docking status indicator. The docking status indicator turns on when the computer is
successfully docked.
Note: If the indicator is off, your computer is not attached to the docking station successfully. To solve
the problem, detach and reattach the computer.
6. Turn the system lock key to the locked position (
8. Ethernet connector
10. USB-C connector
12. Always On USB 3.2 connector Gen 2
).
1 until you hear a click. Slide the latch in the direction as
).
.
Chapter 3 Explore your computer
27