Appendix; Installing The Printer Driver - Canon S900 Quick Start Manual

Appendix

Installing the Printer Driver

If you are re-installing the printer driver, first follow the uninstall procedures on
page 49 to remove the existing printer driver before you re-install.
To install the printer driver in Windows:
1.
Turn both the printer and computer off.
2.
Make sure the cable between the printer and computer is securely connected.
3.
Turn on the computer, then close any open software applications. Insert the
S900 Setup Software & User's Guide CD-ROM in the CD-ROM drive. The setup
program should run automatically.
If the setup program does not run automatically, click Start, then Run, then
type D:\msetup.exe (where D is the CD-ROM drive) and press Enter.
4.
Read the License Agreement, then click Yes if you agree.
5.
When the main menu appears, make sure Printer Driver is highlighted, then
click Install. The printer driver will start loading.
6.
When prompted, TURN THE PRINTER ON so the printer port can be
automatically detected. The software will begin identifying the printer port
being used.
For Windows 2000 or Windows XP, be sure to log on to the system as a
member of the Administrator group.
If the printer was on when the setup program started, the Add
New Hardware Wizard will appear. Do NOT use the wizard—click
Cancel to close the window and continue.
If a message prompts you to restart Windows, remove the
CD-ROM, then click OK. After the computer restarts, re-insert
the CD-ROM and continue.
47