3Com iCV-01a User Manual page 44

Enable
Choose Yes to enable this feature or No to disable.
Community
This is a security feature. Set a Community password to add an extra level of
internet security to WebCAM. Community password is left blank by default.
Click Apply to confirm settings.
To activate the iMage Server account;
1. Click Goto iMage Server. Browser will redirect you to www.iCV99.net the
iMage Server site.
2. For first time login, click on Don't have an iMage account? Click to
register a free account (see Figure 53). Be sure to have the following
information at hand;
i.
ii.
WebCAM - user manual
Fig.51 Image Server settings page
WebCAM Serial Number,
WebCAM Master Password (both information are located on the
label behind WebCAM)
Chapter 3: Web Interface
-41-