Table of Contents
Advertisement
8
www.aeg.com
appliance. Carefully put down the
appliance onto its rear side.
5. Remove the polystyrene protection
from the bottom.
6. Remove the bottom cover from the
worktop. Using clips fix, that you find
in the user manual bag, attach the
cover to the bottom of the appliance.
7. Put the appliance back into an
upright position. Remove the power
supply cable and the drain hose from
1
8. Remove the four transit bolts and
2
9. Put the plastic caps, that you find in
the hose holder.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been tested
at the factory.
pull out the plastic spacers.
the user manual bag, in the holes.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
2
1
Advertisement
Table of Contents
