Attaching - Tarter PFQA Operation And Assembly Manual

ATTACHING TO TRACTOR
1.
Make sure the locking pins, on the loader, are fully
raised.
2.
Drive forward and adjust the loader height and
position. Tilt the loader slightly forward and place the
top of the loader hitch under the top of the angle bars
on the pallet fork.
3.
Slowly lift the loader until the loader and the pallet fork
have come together.
4.
Slowly tilt the loader to align the bottom slots, on the
pallet fork, with the locking pins on the loader.
5.
Push the locking pins on the loader down, until the
locking pins fully extend through the bottom slots of
the pallet fork.
MAKE SURE LOCKING HANDLES ARE IN THE
LOCKED POSITION.
AT TAC H IN G
13