Sharp LC-20SH6U Service Manual page 26

LC-20SH6U
(4) VOLUME FIXED LEVEL
Selection Adjustment from 1 to 60 (no loop)
Default 10
Explanation The sound volume to be fixed by
Limit in Setting None
Exception None
Remarks Setting is valid only when
(5) R/C BUTTON
Selection Selection between
Default Respond
Explanation Keys acceptable by remote control are limited or reception of keys can be prohibited.
Limit in Setting
1In
sensor) are accepted.
2In
Exception Adjustment process, factory setting, inspection process and hotel only keys are valid irrespective of set-
•
ting.
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
•
Remarks
(6) PANEL BUTTON
Selection Selection between
Default Respond
Explanation All the operations by keys (except the power key) of the unit can be invalidated.
Limit in Setting
Exception Inspection mode and hotel menu mode can be started irrespective of setting.
•
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
In U.S.A model, all the keys can be used also in the initial EZ-Setup after power-ON irrespective of
•
setting.
Remarks
(7) MENU BUTTON
Selection Selection between
Default Respond
"
Explanation In No respond
unit are invalidated.
Limit in Setting ON-timer (Wakeup Timer) is turned OFF.
•
The following keys become invalid.
•
Wake-up timer and clock setting keys and all of the direct change keys to menu display
Exception Inspection mode and hotel menu mode can be started irrespective of setting.
•
All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
•
All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
•
Remarks
"
"
Volume fixed
" " "
Respond , Limited
" "
limited setting, only power ON/OFF, sound volume '", tuning '" and BACKLIGHT (brightness
" "
No respond setting, all the keys (including the power key) are not accepted.
" "
Respond and
" "
Respond and
"
setting, the menu operation by the menu key of the remote control and the menu key of the
"
Volume fixed is determined.
" " "
is selected for fixed .
" " "
and No respond (loop provide)
" "
No respond (loop provide)
" "
No respond (loop provide)
26