DISASSEMBLY AND REASSEMBLY OF THE VCR SECTION
1. Remove the eight VCR holder fastening screws
2. Remove the four upper cabinet fastening
screws 8.
3. Remove the seven bottom plate fastening
screws Q.
4. Remove the four cassette housing fastening
screws @.
5. Remove the five main PWB fastening screws @.
6. Remove the two head amp fastening screws @.
7. Remove the four mechanism chassis fastening
screws @.
8. Release the seven operation panel fastening
clips @ and remove the operation upper panel.
9. Remove the six operation holder fastening
screws @.
The VCR power unit removal
is described in the previous