Related Manuals for Alderon Industries Mini Power Post MPMS-0001
Summary of Contents for Alderon Industries Mini Power Post MPMS-0001
- Page 1 Mini Power Post Monitoring System ™ Pump Connection Center | Demand Dose USER GUIDE Alderon Industries™ | Patent Pending MODEL NUMBERS: MPMS-0001 MPMS-0002...
-
Page 2: Table Of Contents
Mini Power Post™ Monitoring System - USER GUIDE Contents Introduction ................................. 3 Safety and System Guidelines ..........................3 Product Included ..............................4 Features ................................. 5 Installation .................................. 6 Installing Post ..............................6, 7 Wiring ................................7, 8, 9 Testing ..................................9 Final Installation ..............................10, 11 Basic System Functions ............................ -
Page 3: Introduction
2. HIGH AMP LEVEL - Acceptable level of current sensed on the pump input during a pump run event. 3. GALLONS PER MINUTE - Perform manual test to determine value entered, when set to zero no statistics are displayed. Alderon Industries™ - Leading Edge Control Products | 3... -
Page 4: Product Included
Versa’larm™ indoor alarm. The filter switch is used to activate an alarm when a septic tank effluent filter needs to be serviced and is universal to any brand of effluent filter that has a one-inch through hole. 4 | Alderon Industries™ - Leading Edge Control Products... -
Page 5: Features
The system MUST be in an idle state (solid green LEDs) to perform testing. When pressed, the event statistic is displayed, then the alarm LEDs will cycle between red, green, blue, and off, see page 18. Alderon Industries™ - Leading Edge Control Products | 5... -
Page 6: Installation
Take the 3-hole rubber grommet (#4) which has slits next to the holes and insert cables, then insert the rubber grommet into the conduit. 5. Place the PVC coupler over the end of the conduit. 6 | Alderon Industries™ - Leading Edge Control Products... -
Page 7: Wiring
1) Press tab(s) outward. DO NOT open past a 40° angle to avoid risk of breaking the tab(s). 2) Insert wire(s) into slot. TO OPEN TO CLOSE 3) Press tab(s) inward. 4) Make sure wire(s) are secured. WAGO WAGO Alderon Industries™ - Leading Edge Control Products | 7... - Page 8 Mini Power Post™ as described above. The alarm panel provides remote notification of alarm conditions. 8 | Alderon Industries™ - Leading Edge Control Products...
-
Page 9: Testing
To ensure the product is functioning properly, test once a week. Note: If using a remote alarm panel, high level alarm float switch, and/or filter switch; refer to the product instructions for additional installation and testing information. Alderon Industries™ - Leading Edge Control Products | 9... -
Page 10: Final Installation
(2A). Fasten the screws to properly secure the cap (2B). The cap prevents water intrusion and allows airflow to prevent the build up of gases and condensation inside the post. 10 | Alderon Industries™ - Leading Edge Control Products... - Page 11 Make sure all steps of the installation, wiring, and testing are complete. Take the dirt/soil removed and backfill the area for the post, riser, and direct burial power wiring. Backfill Area Backfill Area Alderon Industries™ - Leading Edge Control Products | 11...
-
Page 12: Basic System Functions
MENU button from a blank screen will also access the main menu. To view the list of menu screens and system settings, see pages 19-22 for detailed information. (Fig. 1) (Fig. 2) 12 | Alderon Industries™ - Leading Edge Control Products... -
Page 13: Pump Run And Total Gallons Pumped
Measure new water level in tank. iv. Calculate results from test. ▪ All Data Stored in Two Formats i. Resettable; Reset all data to zero. ii. Non-Resettable; All lifetime data is stored. Alderon Industries™ - Leading Edge Control Products | 13... -
Page 14: Pump Alarms
If the GPM is set to zero, the total gallons pumped stats will not be displayed on the OLED screen. ▪ All Data Stored in Two Formats i. Resettable; Reset all data to zero. ii. Non-Resettable; All lifetime data is stored. 14 | Alderon Industries™ - Leading Edge Control Products... - Page 15 15 Amps. See page 21 for detailed information. ▪ All Data Stored in Two Formats i. Resettable; Reset all data to zero. ii. Non-Resettable; All lifetime data is stored. Alderon Industries™ - Leading Edge Control Products | 15...
-
Page 16: Auxiliary Alarms
▪ Power Loss Alarm Event Counter - Records each power loss event. ▪ All Data Stored in Two Formats i. Resettable; Reset all data to zero. ii. Non-Resettable; All lifetime data is stored. 16 | Alderon Industries™ - Leading Edge Control Products... -
Page 17: System Functions | Events, Statistics, Settings, And Menu
Note: The statistic format for elapsed time will display in seconds and minutes up to 599 for each, hours will display up to 999, and hour values greater than 999 will display “out of range” (>999). Alderon Industries™ - Leading Edge Control Products | 17... -
Page 18: Product Label Examples
Any events that are active while system test starts will not be shown, but will be tracked normally. Any newly activated event will deactivate the system test event. 18 | Alderon Industries™ - Leading Edge Control Products... -
Page 19: 2.0, 3.0, And 4.0 | Menu System - Main Menu
Note: The down arrow key will cycle through all the main menu options until a specific option is selected using the right arrow key as displayed on the screen and described above. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 19... -
Page 20: Main Menu - Resettable History
Press the left arrow key to exit from any screen. Press the test pushbutton to exit the menu system. 20 | Alderon Industries™ - Leading Edge Control Products... -
Page 21: Main Menu - Settings
When a setting is changed, SETTINGS Saved will appear on the screen. Press the left arrow key to exit from any screen. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 21... -
Page 22: Main Menu - Lifetime History
The system will display text on the OLED screen for the various system events, see below and examples to the right. Pump Run Extended Pump Run Alarm High Amp Alarm Power Loss Alarm Testing Red Testing Green Testing Blue 22 | Alderon Industries™ - Leading Edge Control Products... -
Page 23: Resettable History - Pump Run Stats
RESETBLE Saved will appear on the screen. Press the left arrow key to exit to the main resettable history events menu. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 23... -
Page 24: Resettable History - Extended Pump Run Stats
RESETBLE Saved will appear on the screen. Press the left arrow key to exit to the main resettable history events menu. Press the test pushbutton to exit the menu system. 24 | Alderon Industries™ - Leading Edge Control Products... -
Page 25: Resettable History - High Amp Stats
RESETBLE Saved will appear on the screen. Press the left arrow key to exit to the main resettable history events menu. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 25... -
Page 26: Resettable History - Pump Float Stats
RESETBLE Saved will appear on the screen. Press the left arrow key to exit to the main resettable history events menu. Press the test pushbutton to exit the menu system. 26 | Alderon Industries™ - Leading Edge Control Products... -
Page 27: Lifetime History - Pump Run Stats
Press the left arrow key to exit to the main lifetime history events menu. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 27... -
Page 28: Lifetime History - Extended Pump Run Stats
Press the left arrow key to exit to the main lifetime history events menu. Press the test pushbutton to exit the menu system. 28 | Alderon Industries™ - Leading Edge Control Products... -
Page 29: Lifetime History - High Amp Stats
Note: The down arrow key will cycle through all the high amp stats. Press the left arrow key to exit to the main lifetime history events menu. Press the test pushbutton to exit the menu system. Alderon Industries™ - Leading Edge Control Products | 29... -
Page 30: Lifetime History - Pump Float Stats
High Amp (last event), Average, Maximum, Minimum, Elapsed Time, and Event Counter Pump Float Stats (→) i. Pump Float Event Counter Power Loss Stats (→) i. Power Loss Event Counter 30 | Alderon Industries™ - Leading Edge Control Products... -
Page 31: General Operation
Use the menu keys to view data for: pump cycle counts, pump elapsed time, total gallons pumped, and much more. Mini Power Post™ Monitoring System Versa’larm™ Indoor Alarm Panel 5:05 Alarm Filter House REGENERATION Float Switch MENU ENTER Septic Septic Drain Field Pump Switch Alderon Industries™ - Leading Edge Control Products | 31... -
Page 32: Troubleshooting
OLED screen, board (UI Error event) connection, consult factory if the error and alarm buzzer is not annunciating remains after checking ribbon 32 | Alderon Industries™ - Leading Edge Control Products... -
Page 33: Specifications
Caution: changes / modifications not approved by Alderon Industries could void the user’s authority to operate the equipment. -
Page 34: Model Number Nomenclature
= 2.5" Riser Connection Kit Example Shown: Mini Power Post™ Monitoring System, 120VAC, 1-Zone Indoor Alarm, 20' Alarm Float, 20' Filter Switch, 15A 20' Wide Angle Pump Switch, 2.0" Riser Connection Kit 34 | Alderon Industries™ - Leading Edge Control Products... -
Page 35: Warranty Information
Three-Year Limited Warranty - Standard Products LIMITED WARRANTY: Subject to the conditions of this Three-Year Limited Warranty, Alderon Industries, LLC (“Alderon”) war- rants to the original user or consumer of an Alderon product (the “Product”) that, for a period of three (3) years from the date of manufacture, the Product will be free from defects in materials and workmanship under normal use and service, and provided the Product is installed, operated and maintained in accordance with instructions supplied by Alderon. -
Page 36: Company Information
UG00290_Rev05_MPMS_Mini Power Post Monitoring System | March 8, 2021 10:55 AM Company Location: 151 16th Street South, Hawley, MN 56549 Mailing Address: PO Box 827, Hawley, MN 56549 Main Office Phone: 218.483.3034 Website: alderonind.com General Inquiry Email: info@alderonind.com Submit New Orders: orders@alderonind.com...
Need help?
Do you have a question about the Mini Power Post MPMS-0001 and is the answer not in the manual?
Questions and answers