Advertisement
Sportsound SSR-300 Quick Start Guide
Personal Monitor System Operation
Transmitter
1. Flip the transmitter power switch to ON if it is not already on; ensure the RF
switch to the left of it is OFF at this time.
2. Power on the handheld receiver using the volume knob.
3. Attach the antenna and earphones to the top of the handheld receiver.
4. Flip open the battery cover to expose the control buttons. Press scan and the
display will show "SYNC NOW".
Note: Insert new or fully-charged batteries prior to each use, and always
have spares on hand.
5. Hold the bodypack up to the transmitter with the sync IR windows facing
each other, and press sync on the transmitter. The display will show "SYNC
SUCCESS" when finished.
6. Flip the transmitter RF switch to ON. The blue LED on the receiver should
illuminate to indicate that it is detecting the transmitter.
DD2222144 Rev 4
11 August 2016
1
5
6
201 Daktronics Drive PO Box 5128, Brookings, SD 57006-5128
Tel: 1-800-DAKTRONICS (1-800-325-8766) Fax: 605-697-4746
Web: www.daktronics.com/support
Receiver
3
2
4
5 of 6
Advertisement
