Cleaning And Replacing Filter Cartridge; Disinfection; Water Sanitation; Drainage And Storage - avenli SPA3 User Manual

Cleaning and replacing filter cartridge

Dirty filter cartridge may contaminate the pool water and cause damage to the heating
function.
1. Unscrew the filter case by turning it counter-clockwise. Take out the filter cartridge
from the case.
2. Rinse off the filter cartridge with a garden hose. If the filter cartridge remains dirty
and discoloured, the filter cartridge should be replaced.
3. Put back the cleaned filter cartridge into his case and screw it to the pool.

Disinfection

Water Sanitation:

To sanitize the pool water, we suggest using an active oxygen-based treatment or
bromine placed in a floating dispenser. (Dispenser sold separately)
If water is heavily polluted you should not use pool.
Clean pool with with specialist UV lighting equipment.
Seek professional advice and guidance before doing this.
Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may build up
on the spa walls, Use soap and water to clean the walls and rinse thoroughly with a
garden hose using a direct powerful waterspray.

Drainage and storage

Drainage
Check the stopper on the bottom of the pool and the drain cap.
•
Unscrew the drain cap.
•
Remove the stopper on the bottom of the pool. Completely drain all water from the
•
spa pool.
Once empty, the pool can be cleaned with soap and water.