Pool Cover And Security; Water Maintenance; Water Balance - avenli SPA3 User Manual

Pool cover and security

After each use, the control panel must be locked and the pool must be coated with its
top cover and it must be attached to the base protector with the safety buckles.
Each safety buckles has a lock system ; closed buckle, the latch in up position locks the
buckle, the latch in down position unlocks the buckle.
The top cover keeps the heat from the water and secures the pool.
Maintenance

Water maintenance

WARNING: A bad pool water quality can harm your health.
Depending on the frequency and conditions of use:
The filter cartridge should be regularly cleaned (150 hours max.).
-
The filter cartridge should be replaced every 1 to 2 month.
-
The pool water should be changed every 15 to 30 days.
-
Use a water test kit to control the parameters of the water before using the spa, or at
least once a week.
Use disinfection products for the spa. The treatment products should be used with
caution and it is imperative to refer to their instructions.
Damage resulting from improper use of treatment products is not covered by warranty
(overdose, shock treatment, ...).

1. Water balance

The water balance (pH) must be maintained between 7 and 7.4.
2. Water Sanitation
To sanitize the pool water, we suggest using an active oxygen-
based treatment or bromine placed in a floating dispenser.
(Dispenser sold separately).