Samsung SGH-T769 User Manual page 208

To activate the Mobile HotSpot service:
Press
1.
Wireless and network
Tap Mobile HotSpot settings
2.
Tap Mobile HotSpot. This places a checkmark in the
3.
adjacent field to activate the service.
Tap OK to continue with the activation.
4.
Tap Configure Mobile HotSpot.
5.
Create a new Network SSID name and then write it down.
6.
Confirm the HotSpot service icon
7.
of the screen.
Note: By default, the connection is open and not secured. It is recommended
that you access the MobileWi-Fi Hotspot settings and create a secure
connection by using a password for communication.
Note: Using your 4G service and Mobile Wi-Fi Hotspot drains your phone's
battery at a much faster rate than when using any other feature
combination.
The best way to keep using the phone as a hotspot is to have it
connected to a power supply.
204
and then tap (Settings)
USB tethering and Mobile HotSpot.
OK.
appears at the top
To connect to the Mobile Hotspot:
Enable Wi-Fi (wireless) functionality on your target device
1.
(laptop, media device, etc.).
Scan for Wi-Fi networks from the device and select your
2.
phone hotspot from the network list.
• The SSID name for your phone's hotspot is determined by what you
entered into the Network SSID field.
• You can change the name by tapping Configure Mobile HotSpot
Network SSID and changing the entry.
Select this Hotspot and follow your on-screen instructions
3.
to complete the connection.
Launch your Web browser to confirm you have an Internet
4.
connection.
To secure the Mobile HotSpot service:
The two most common methods for securing your connection to
the Hotspot are to a security method (WPA2 PSK) and to Hide
your phone's SSID name.
Press and then tap
1.
Wireless and network
Mobile HotSpot settings
Tap the Security field and select WPA2 PSK.
2.
(Settings)
USB tethering and Mobile HotSpot
Configure Mobile HotSpot.