Page 1
DVR and NVR via 3G or above, or WIFI. Installation Search for the InfiViewCam App on Google Play Store for Android devices or App Store for iOS devices and install on your smart phone. Run the app, it will display the live view screen as shown below.
Page 2
InfiViewCam Installation Manual Adding Recorder by Scanning QR Code In the Add New Device window, scan the QR Code Sticker present on the recorder or Scan the QR code from recorder Information menu. Once connected, all the channels will be displayed.
InfiViewCam Installation Manual Adding Recorder using Manual Add In the Add New Device window, Click on Manual Add, and enter all the required parameters for the recorder to be added to the Device List. IP Address/ID: IP Address of the Recorder...
InfiViewCam Installation Manual Liveview Click to go to Live View interface. Under Live View interface, click on top right to go to Devices interface. Icons on Devices interface are shown in the table below: Icons Function Devices Channel Select channel to do live view Return to live view interface Click device to select channels, and then click Start Live View icon to view the cameras.
InfiViewCam Installation Manual Set/Call Preset Points Press PTZ control arrows to move the camera to the requested place. Click to set preset points (1—256). Click Set to complete. Slide up and down to select preset points. Click Call to call preset point.
InfiViewCam Installation Manual Snapshot Record Mute on/off Slide playback time bar can adjust playback time, and hold and drag playback windows can reorder the windows. Zoom Double click to enlarge the window, and then hold or separate fingers to Zoom in/out.
InfiViewCam Installation Manual Image Manager Click to go to Image Manager Interface. Under Image Manager Interface, you can view and email snapshots. Delete Devices Under Image Manager interface, hold and move to left until Delete button in Red appears, click Delete to remove device.