Table of Contents
Advertisement
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume key
on the left side of the phone.
Press Up (top of the volume key) to increase the volume
level and press Down (bottom of the volume key) to
decrease the volume level.
A pop-up shows the volume status and a sound
demonstrates the volume level.
From the Home screen, you can also adjust the ringer volume
using the Volume key. A pop-up shows the volume status and a
sound demonstrates the volume level.
In-Call Options
During an active call there are several functions available by
touching a corresponding on-screen button.
Hold: Place the current active call on hold.
•
Add call: Displays the dialer so you can call another person.
•
Dialpad: Displays the on-screen keypad, where you can enter
•
number using DTMF (Dual Tone Multi-Frequency).
End call: Terminates the call.
•
Speaker: Routes the phone's audio through either the speaker or
•
through the earpiece. Use the Volume key to adjust the speaker volume.
59
– Touch Speaker to route the audio through the speaker. A green line
appears under the Speaker button.
– Touch Speaker again to use the phone's earpiece (see "Using the
Speakerphone During an Active Call" on page 61). The green line
turns grey when Speaker is not activated.
•
Mute: Turn the onboard microphone either on or off.
– Touch Mute during a call to mute the microphone. A green line appears
under the Mute button.
– Touch Mute again to unmute the microphone. The green line turns grey
when Mute is not activated.
Headset: Connects to a Bluetooth headset. Bluetooth must be enabled.
•
– Touch Headset during a call to activate a Bluetooth headset. A green
line appears under the Headset button.
– Touch Headset again to de-activate the Bluetooth headset. The green
line turns grey when the Headset is not activated.
Press the Menu Key
for more options:
– Contacts: Displays your Contact list.
– Memo: Opens the Memo app so you can jot down a memo during a
call.
– Noise Reduction On/Off: Turn On the Noise Reduction feature when
you are in a noisy area. Turn it Off when not needed to conserve battery
power.
Advertisement
Table of Contents
